Do you feel helpless when your Nintendo Switch controller isn’t charging? Worry no more, this article will tell you exactly what to do to get your Switch back in action. You’ll never have to worry again about not being able to enjoy your favorite games with a dead controller.
Introduction
Are your Nintendo Switch Joy-Con controllers not charging? Don’t worry – this is a common problem and it can be solved easily. There could be several reasons why your controller isn’t charging and a few simple steps can help you find the cause of the issue. Before grabbing your toolbox, start with the checklist below to identify and fix basic issues. With these tips, you’ll have your controller charged up and ready to use within minutes.
Have you:
- Checked if the console is turned on?
- Made sure that its plugged into a working outlet?
- Restarted your Nintendo Switch by holding down the power button for at least 12 seconds?
- Checked if both ends of the USB cord are securely connected?
- Inspected both ends of the USB charging cable for any possible damage or dirt buildup?
- Tried recharging in multiple outlets?
Understanding the Problem
If your Nintendo Switch controller isn’t charging, there are a few potential causes and solutions you can try. The first step is to identify the cause of the problem so that you can find the most effective solution. It’s best to start by understanding how your controller is powered and how it should charge. Your Nintendo Switch controller uses a rechargeable Li-Ion battery, which means it must be recharged when necessary. The controller comes with a USB-C cord that connects the controller to your console or an available power source.
Your controller will draw its power from this cord when necessary, and will not turn on unless it is receiving power from the cable. Once the USB-C cable has been connected, you should see an orange light on the bottom of your controller indicating that charging has begun. Charging should take about 4 hours in total, but if this light does not appear then something may be wrong with either your power source or your console connection. In such cases, you may need to troubleshoot further in order to determine where the issue lies and how best to resolve it.
How long do nintendo switch controllers take to charge
If your Nintendo Switch controller isn’t charging, first make sure you are using the correct USB-C cable (the one included with your Switch) and that it’s connected properly in the charging port on the bottom of the controller. If that doesn’t work, try connecting the USB-C cable to a different port on your computer or to an external charger.
If that still doesn’t work, try reinstalling or replacing the battery by carefully removing it from the back of your controller and re-inserting it according to instructions in your user manual. If this fails to resolve your issue, there could be a problem with the hardware itself. Check for any visible signs of wear or damage such as:
- worn out buttons
- frayed wiring
- water damage
All of which can prevent your controller from charging properly. If you find physical signs of wear and tear or damage, contact technical support for assistance or have a professional look at it. Finally if all else fails, you may need to purchase a new controller. While this is certainly not an ideal solution, purchasing a new device may be necessary depending on how much use yours has seen over time.
Cleaning the Charging Ports
If your Nintendo Switch controller isn’t charging, the first step is to examine both the charging cable and the port in the controller. Make sure they are free of any dirt, dust or other debris that may be blocking or interfering with a proper connection. If necessary, you can use a cotton swab lightly moistened with rubbing alcohol to remove any build-up. Do not insert anything sharp into or around the port.
If cleaning does not help, you may need to replace either (or both) components. If your charging cable shows signs of physical damage – such as splits, holes or wires that are visible – consider replacing it as soon as possible. This is especially true if it has been exposed to moisture or dropped several times. Similarly, if there is any visible damage in the port of your controller, you may wish to have it serviced by an authorized Nintendo technician to avoid further issues.
Checking the Battery
If your Nintendo Switch controller isn’t charging, the first step is to check the battery. This should be done regularly, especially if you haven’t used it in a while or noticed any changes in performance. Verify that the battery does not have any damage or holes, and ensure that the USB-C port is free of dust, dirt, and debris. If you find any evidence of damage or obstruction in this area, contact Nintendo support for more information.
Another way to check the battery is to remove it from its housing and inspect its terminals. Wiggling them slightly can tell you if they’re worn down or in need of replacing. Check your controller’s user manual on how to remove and replace its batteries. However, keep in mind it may void your warranty so be cautious when attempting this by yourself.
Checking the USB Cable
The Nintendo Switch console is designed to charge its controllers when connected, as long as both are plugged into an appropriate wall outlet and the USB cable is firmly attached to both the console and controller. If you’re experiencing problems with your controller not charging, the first step to take is to make sure that the USB cable is properly connected. Check all of the ports on both the controller and console for any signs of dust or dirt buildup that may interfere with a secure connection.
If everything looks well in terms of connections and there’s still no visual indication that it’s charging, try using a different USB-C cable or checking another device such as your phone charger or laptop power adapter to make sure it isn’t just a faulty cable. Depending on how long it has been since you last used a brand-new cable, it could be due for a replacement as even good quality cables won’t last forever. Finally, if you’ve already tried these steps and are still having difficulties getting your controller to charge, don’t hesitate to contact customer service for assistance.
Resetting the Controller
If your Nintendo Switch Pro Controller is not charging, it may be necessary to reset the controller. Resetting the controller will erase all of your previously saved data and can also resolve any issues related to a dead battery or incomplete update installation. To do this, press and hold down the small circular button (located near the left stick on the back of the controller) and then press down any other button. This will cause a prompt window to appear on your screen asking if you would like to reset your controller. Select ‘Yes’ to proceed with the reset and then wait for the battery icon to reappear in order for it to start charging again.
Conclusion
In conclusion, it is important to remember that if your Nintendo Switch controller isn’t charging, there could be a few potential reasons. The easiest and most cost-effective fix may be as simple as making sure the contact pins on the controller and dock are clean by wiping off any dust with a dry cloth. If this doesn’t solve the issue, then you may need to look into replacing the charging cable, dock or battery altogether depending on what you find to be faulty. It never hurts to consult with a specialist or read up on troubleshooting guides for further help if needed.